It is easy and ready to use, connect to the power supply, put the rope senser cable onto somewhere you want.

When the sensor cable touch water, it will sound a alarm.

This water leak detection sensing cable provides distributed linear water leak detection at any point along its length allowing full coverage around vulnerable infrastructure such as power and data or critical equipment and sources of possible leaks.

Water leak detection sensing cable is lightweight, anti-abrasion and corrosion-resistant.

It is also mechanically strong and flexible allowing easy installation on site.

Supplied in a range of factory terminated lengths. It will pass through a 20mm (3/4 inch) hole.

Simply plug together to form the required length.

Its rugged construction exposes no metal sensing elements allowing it to be used in mildly corrosive applications

This leak detection sensing cable is ideal for area’s where no water leaks should be present. It is particularly suited to shadowing pipe runs below false floors and ceilings. Attaching directly to pipework is also possible, but an insulating barrier tape should be used on foil lagging.

Other length of leak detection sensing cable is available: 5 meters, 10 meters, 15 meters, 20 meters, 50 meters, 100 meteres e.g

Sensor working temperature range:
32 to 167ºF (0 to 75ºC), 0 to 95%RH, Non-condensing
Attached -40 to 185ºF (-40ºC to 85ºC), 0 to 95%RH, Non-condensing

Package including:

1 x 3 meters sensor cable

1 x 2-meter lead jumper wire

1 x water leak alarm detector

1 x 110v - 220v power supply adapter